logo50-eng

ITALIAN PRESTIGE

Europressvit has been producing and distributing STAINLESS STEEL SCREWS and BOLTS worldwide since 1968.

A single reliable and dynamic organization able to PRODUCE INTERNALLY special screws and bolts and, in the same time, also able to deliver from stock thousands of standard items and special components that we implemented with turned parts, readily available through stock specifically dedicated to customer requirements.

Thanks also to our historical know how during over 50 years of sector and several partnerships established with important metalworking companies, EUROPRESSVIT proposes itself to the industry as a complete supplier of fixing systems.

A dual productive and commercial vocation that makes Europressvit the only leading company in its sector that for 50 years has guaranteed a supply for all types of industrial applications.

Competence, quality and good service for direct, efficient client - supplier cooperation.

Europressvit headquarters
Warehouse Europressvit
Stainless steel screws and bolts production
Produzione viti inox speciali su disegno
 

Products

SPECIAL DRAWING BASED

STOCK AND STANDARD

 

 

Materials

Europressvit specializes in the production and distribution of the following types of stainless steel screws and bolts:

Aisi 304 – Aisi 304 Cu –Aisi 304 L - Aisi 316 – Aisi 316 Cu – Aisi 204 Cu – Aisi 430.

stainless steel coil

AISI 304 - EN 1.4301/3

Low-C, non-temperable, corrosion-resistant austenitic Cr-Ni steel, non-magnetic in the annealed condition, slightly magnetic if cold worked.
Good weldability and resistance to intercrystalline corrosion.
Excellent tenacity even in extremely low temperatures. May be electronically polished.
AISI/ASTM/UNS Euronorm Nom. C Si Mn P
304 1.4301 X5CrNi18-10 <=0.070 <=0.75 <=2.00 <=0.040
S Cr Ni Mo Ti Cu Other
<=0.030 18.00-19.00 8.00-9.00 - - - N(ppm)<1100

 

AISI 304 CU – EN 1.4567

Austenitic, non-magnetic under all conditions, the presence of Cu and Ni lends excellent plasticity and sliding properties, good resistance even in sea water.
AISI/ASTM/UNS Euronorm Nom. C Si Mn P
304 CU
 1.4567 X5CrNiCu18-9-4 <=0.030 <=0.75 <=1.50 <=0.040
S Cr Ni Mo Ti Cu Other
<=0.015 17.00-19.00 8.50-9.00 - - 3.00-3.50 N(ppm)<700

 

AISI 304 L - EN 1.4306/7

Non-temperable Austenitic Cr-Ni Steel particularly appropriate for welded assemblies. Shows excellent resistance to intercrystalline corrosion, can be normally used up to 425°C.
AISI/ASTM/UNS Euronorm Nom. C Si Mn P
304 L
 1.4306 X2CrNi19-11 <=0.030 <=0.75 <=2.00 <=0.040
S Cr Ni Mo Ti Cu Other
<=0.030 18.00-20.00 10.00-11.00 - - - N(ppm)<700

 

AISI 316 - EN 1.4401

Non-temperable Austenitic Cr-Ni-Mo steel to which Molybdenum lends additional resistance to corrosion.
The mechanical features at high temperatures are also better than those of similar types without Molybdenum.
AISI/ASTM/UNS Euronorm Nom. C Si Mn P
316 1.4401 X5CrNiMo17-12-2 <=0.070 <=0.75 <=2.00 <=0.040
S Cr Ni Mo Ti Cu Other
<=0.030 16.50-18.00 10.00-11.00 2.00-2.50 - - N(ppm)<1100

 

AISI 316 CU - EN 1.4578

Austenitic, non-magnetic, right for almost all cold plastic deformations. It shows good resistance to intercrystalline and pitting corrosion even in highly aggressive environments.
AISI/ASTM/UNS Euronorm Nom. C Si Mn P
316Cu 1.4578 X3CrNiCuMo 17-11-3-2 <=0.040 <=1.00 <=1.00 <=0.045
S Cr Ni Mo Ti Cu Other
<=0.015 10.00-18.00 11.00-11.00 2.00-2.50 - 3.00-3.50 N(ppm)<1100

 

AISI 204 CU - EN 1.4597

Austenitic Cr-Mn Steel with a moderate amount of nickel, copper and nitrogen.
Similar characteristics to the Aisi 304 cu with better mechanical resistance and lower resistance to corrosion in acid environments or in the presence of chloride.
AISI/ASTM/UNS Euronorm Nom. C Si Mn P
204Cu 1.4597 X8CrMnCuNB 17-8-3
 <=0.10 <=2.00 6.50-8.50 <=0.040
S Cr Ni Mo Ti Cu Other
<=0.015 16.00-18.00 <=2.00 <=1.00 - 2.00-3.50 N(ppm) 1500-3000

 

AISI 430 - EN 1.4016

Non-temperable Cr ferritic stainless steel for general use, with higher resistance to corrosion and heat compared to the 13% Cr types.
AISI/ASTM/UNS Euronorm Nom. C Si Mn P
430 1.4016 X6Cr17 <=0.040 <=1.00 <=1.00 <=0.040
S Cr Ni Mo Ti Cu Other
<=0.015 16.00-18.00 - - - - N <=0.033

Trade

NOT ONLY OWN PRODUCTION!

Over more than 50 years, thanks to the historical know how of the sector, we consolidated many relationships with important partners , that we carefully selected for quality and price competitivity , in order to integrate our assortment range with the most varied solutions that are out of our own manufacture , as for example turned components .

Europressvit proposes itself to the industry as a complete supplier of fixing systems, with palpable benefits that this involves!

 
 

Services

As a result of years of experience and sound knowledge of the field, Europressvit is able to provide a wide range of services, including every type of processing, custom packaging and advanced stock management in its warehouse, Kanban and Consignment Stock.

 

QUALITY - HEALTH and SAFETY ASSESSMENT

Europressvit's quality management system has been certified since 1995 and is compliant with the Iso 9001:2015 requirements.

The quality of the products is guaranteed through continuous controls both during the acquisition of the raw materials and finished product phases.

The processing and analysis of the data are carried out by a special, dedicated data processing system.

Europressvit can provide all Mechanical Certificates of Tests, Trials or Reports.

The performance of Europressvit's entire quality management system is constantly monitored to achieve organizational excellence, aimed at reliability and complete satisfaction of the client.

Europressvit’s workplace environment and safety are compliant with current regulations and boast the OHSAS 18001 certification.

certification

quality control

Footer-top